Search Results

A highly accurate RTC module with I²C bus interface providing timing accuracy of ±3ppm (or ±1.81 seconds per day), the RV-8803-C7 is also the world's smallest RTC module, with a package footprint of only 3.5 x 1.5mm. In addition to providing excellent frequency stability this real time clock module is also one of the lowest power temperature compensated RTC modules with back up power requirement of only 240nA with automotive grade options available. This product was previously named RV8803C7.

32.7680kHz GWX-1610 Crystal with a 9pF load capacitance and ESR of 90kΩ

Due to technology improvements the RV-3029-C2 is no longer recommended for new designs but is suitable as a drop in replacement for existing designs within a 5.0 x 3.2mm footprint which require I²C bus 2-wire serial interface and frequency stability over temperature ranges as wide as -40 to +125ºC. For new designs that require extended temperature ranges please consider the smaller and more competitive RV-3129-C3 or RV-8803-C7 for designs where power consumption is paramount. This product was previously named RV3029C2.

The 21G7B four pole crystal filter with centre frequency of 21.4MHz and has bandwidth of ±7.5kHz 3dB @ 3dB. The four pole 21G7B comes as encased within two UM-1/3L packages.

The GVXO-42F features stand out frequency pullability of ±200ppm at frequencies from 33.0MHz up to 160MHz. Encased within a full-size 14-pin DIL package, the GVXO-42F is ideal for applications that require low cost, high frequency components. 

The GVXO-523 voltage controlled oscillator, with 5.0 x 3.2mm miniature surface mount package and industry-standard 4-pad configuration, features excellent low jitter characteristics and fast start up time. 

The highly configurable, low profile GSX49-4 crystal is available at frequencies between 3.18 ~ 90.0MHz and features a range of calibration tolerance, temperature stability, operating temperature range, and circuit condition options. One of our most competitive crystals, you can find full product specifications and configure your product here.

Part of our automotive GRX range, the GRX-315 is our dedicated automotive 32.768kHz solution and comes fully AEC-Q200 qualified as standard. The GRX-315 offers particulalry competitive pricing for volume applications and low power consumption for minimal impact on design power budgets.

Encased within a 5.0x3.2mm industry standard package, the GRX-530 comes with AEC-Q200 as standard as part of our dedicated automotive GRX range. Available in frequencies from 9.80-40.0MHz, seam sealing of the miniature ceramic package with metal lid increases ensures the GRX-530 offers excellent long-term stability, ideal for applications such as vehicle telematics, remote keyless entry, camera and audio applications.

Due to technology improvements the RV-3049-C2, SPI bus RTC is no longer recommended for new designs but is suitable as a drop in replacement for existing designs within a 5.0 x 3.2mm footprint and which require SPI bus and frequency stability over extended temperature ranges as wide as -40 to +125ºC. For new designs that require temperature compensation over extended temperature ranges please consider the smaller and more competitive RV-3149-C3. This product was previously named RV3049C2.

Due to technology improvements the RV-8564-C2 is no longer recommended for new designs but is suitable as a drop in replacement for existing designs within a 5.0 x 3.2mm footprint which require I²C bus 2-wire serial interface and current consumption of up to 250nA. For new designs that require low power consumption please consider the smaller and more competitive RV-1805-C3 or RV-4162-C7 for designs where highly competitive pricing is paramount.

The TF0121A SAW duplexer has transmit centre frequency (Tx) of 1880MHz and receive centre frequency (Rx) of 1960MHz. Encased within an ultra-miniature 1.8 x 1.4mm surface mount package, the TF0121A is recommended for 4G LTE band 2 and for automotive applications and comes with AEC-Q200 qualification as standard.

The TF0123A SAW duplexer has transmit centre frequency (Tx) of 836MHz and receive centre frequency (Rx) of 881MHz. Encased within an ultra-miniature 1.8 x 1.4mm surface mount package, the TF0123A is recommended for 4G LTE band 5 and for automotive applications and comes with AEC-Q200 qualification as standard.

The TF0127A SAW duplexer has transmit centre frequency (Tx) of 1880MHz and receive centre frequency (Rx) of 1960MHz. Encased within an ultra-miniature 1.8 x 1.4mm surface mount package, the TF0127A is recommended for 4G LTE band 2 and for automotive applications and comes with AEC-Q200 qualification as standard.

Ideal for automotive applications and for use within 4G LTE band 4, our TF0128A miniature SAW duplexer has transmit centre frequency (Tx) of 836MHz and receive centre frequency (Rx) of 881MHz, and comes with AEC-Q200 qualification as standard.

The TF0129A SAW duplexer has transmit centre frequency (Tx) of 836MHz and receive centre frequency (Rx) of 881MHz. Encased within an ultra-miniature 1.8 x 1.4mm surface mount package, the TF0129A is recommended for 4G LTE band 5 and for automotive applications and comes with AEC-Q200 qualification as standard.

The TF0136A BAW duplexer has transmit centre frequency (Tx) of 1883MHz and receive centre frequency (Rx) of 1963MHz, and has 65MHz bandwidth. Encased within an ultra-miniature 1.8 x 1.4mm surface mount package, the TF0136A is recommended for 4G LTE band 25 and for automotive applications and comes with AEC-Q200 qualification as standard.

Operating at 3.3V supply voltage the GXO-U108L offers the engineer tight stabilities of up to ±20pmm with frequencies available up to 170MHz. Built-in power saving ensures the required supply current remains low, even at high frequencies and industrial operating temperature range of -40 to +85ºC is available. The GXO-U108L comes encased within a robust 7x5mm ceramic package with metal lid.

The 21G7A two pole crystal filter has bandwidth of ±7.5kHz 3dB @ 3dB around centre bandwidth of 21.4MHz. This two pole filter features low in-band ripple and insertion loss and comes encased within a single UM-1/3L package.

The GXO-U108H features industry-standard 7.5 x 5.0mm ceramic package with metal lid and gold plated pads as standard. This 5.0V oscillator is available over a wide frequency range of 1.8~80.0MHz and features enable/disable functionality and high 50pF CMOS driving ability.

The GMCF-45 45G20B3 4 pole crystal filter from Golledge with centre frequency of 45MHz features a 20kHz 3dB bandwidth and is available in multiple packages, including both UM-1 and UM-5 style leaded packages and UM-1J and UM-5J surface mount packages. This filter also features insertion loss of just 3.0dB dB. Find full specifications here.

The RV-3049-C3 is no longer recommended for new designs but is suitable as a drop in replacement and features superb timing stability, temperature compensation and SPI bus interface in a miniature 3.7 x 2.5mm surface mount package. Wide operating temperature ranges of -40 to +125ºC are available as is AEC-Q200 qualification and full PPAP documentation on request.

Offering high frequency output of up to 125MHz in a DIL-14 Package, the GVXO-44F voltage controlled oscillator also features a wide range of possible frequency stability and pullability options. The GVXO-44F has 3.3V supply voltage requirement and has driving ability of 30pF CMOS. 

The GVXO-753 provides a highly cost effective 3.3V VCXO solution. This 4-pad voltage controlled oscillator offers a range of frequency pullability and frequency stability options and is available with industrial operating temperature range of -40 to +85°C. 

Providing a highly cost effective 3.3V VCXO solution for volume applications, the 6-pad GVXO-753F also features in-built enable/disable tristate functionality. The GVXO-753F also allows a choice of frequency stability and pullability options and is available with industrial operating temperature range of -40 to +85°C making it an ideal VCXO solution for a range of high volume applications.

The GSX-1A two-pad fully ceramic SM package crystal, is available in a variety of oscillation modes, including fundamental up to 50.0MHz. Available at frequencies from 5.0-84.0MHz, and with a range of temperature stabilities and operating temperature ranges up to -40 to +85°C.

The GSX-1B crystal comes in a four-pad fully ceramic SM package with diagonal connections. Available in a variety of oscillation modes, including fundamental up to 50.0MHz, in frequencies from 5.0-84.0MHz, and with a range of temperature stabilities and operating temperature ranges up to -40 to +85°C.

The GSX-1C crystal comes in a two-pad fully ceramic SM package with extended pitch between pads of 5.08kmm. Available in a variety of oscillation modes, including fundamental up to 50.0MHz, in frequencies from 5.0-84.0MHz, and with a range of temperature stabilities and operating temperature ranges up to -40 to +85°C.

The GXO-3301L oscillator is available at frequencies within the 0.625 ~ 50.0MHz range and is operable at any supply voltage from 2.5V-3.3V. This oscillator features tight frequency stability and low current consumption as standard.

The GXO-3332N is now obsolete. For more information on this change please see our Product Change Notice PCN220110 06539 here. For existing designs the GXO-3300 family offer drop-in-replacement parts, and for new designs we recommend considering the GXO-3200 or GXO-3232. Alternatively you can speak to a member of our expert team by calling +44 1460 256 100.

The RV-3029-C3 is no longer recommended for new designs but is suitable as a drop in replacement for existing designs which require a miniature 3.7 x 2.5mm footprint. The RV-3029-C3 offers excellent time accuracy of ±3ppm (0.26s/day drift) and is temperature compensated, allowing for outstanding ±8ppm stability over extended operating temperature range of -40 to +125ºC. The RV-3029-C3 with I²C bus interface also features great shock and vibration resistance and is available with AEC-Q200 qualification (and full PPAP documentation) on request. This product was previously named RV3029C3.

The RV-4162-C7 ultra-miniature RTC module is perfect for high volume applications where you need an all-in-one solution to help with space saving and procurement costs. The tiny 3.2 x 1.5mm footprint enables additional design space and, along with wide operating voltage range and good stability at room temperature, the RV-4162-C7 also features I²C bus interface, standard clock and calendar functionality, alarm setting and a watchdog function. This product was previously named RV4162C7.

Ideal for engineers who require low power at supply voltages down to 1.2V, the RV-8532-C3 with I²C bus interface consumes current of only 130nA in time-keeping mode. Encased within a miniature 3.7 x 2.5mm footprint package, the RV-8523-C3 also features good shock and vibration performance and is available with AEC-Q200 qualification and full PPAP documentation on request. This product was previously named RV8523C3.

Due to technology improvements the RV-8564-C3 with I²C bus interface is no longer recommended for new designs but is fully available for existing design-ins. For new designs that require low power consumption please consider the smaller and more competitive RV-1805-C3 or RV-4162-C7 for designs where highly competitive pricing is paramount. This product was previously named RV8564C3.

The RV-2123-C2 real time clock (RTC) module offers the engineer SPI bus interface with low supply voltage options within a miniature surface mount package. A time-saving all-in-one solution with our lowest power consumption for an SPI bus module, this uncompensated solution also features excellent shock and vibration resistance and optional AEC-Q200 qualification.

Featuring 6-pad PCB base and metal lid package, the GTXO-566N VCTCXO has voltage adjustment and comes with a choice of excellent frequency stability options including as tight as ±1.0ppm. 

Featuring 6-pad PCB base and metal lid package, the GTXO-566T TCXO has a choice of excellent frequency stability options including as tight as ±1.0ppm, and comes with internal trimmer. 

Featuring 6-pad PCB base and metal lid package the GTXO-560V TCXO has voltage adjustment and internal trimmer, and comes with a choice of excellent frequency stability options including as tight as ±1.0ppm. 

The GSX-309 crystal was available at frequencies between 4.0 ~ 30.0MHz and featured a range of excellent frequency tolerance and temperature stability options. This product is now obsolete, please contact our team for more details or for a replacement product recommendation.

One of our most competitive cystal products, the GSX49-3 crystal is available over a wide frequency range of 3.578999 ~ 90.0MHz and features a range of excellent frequency tolerance and temperature stability options.

The HC49-3H crystal is available at frequencies between 3.5 ~ 90.0MHz and features a wide range of frequency tolerance and temperature stability options. This leaded crystal with industry standard package has height of 3.5mm.

Available at frequencies from 1.8 ~ 50.0MHz, the GXO-U113L 5.0V surface mount oscillator features small 6.0 x 3.5 x 1.2mm ceramic package with metal lid and comes with enable/disable power saving function as standard.

The TB0588A SAW filter has a passband bandwidth of 10MHz centred on frequency 288MHz

The ultra-miniature 3.0x3.0mm package of the TA0288A SAW filter makes this product ideal for applications where product-size is paramount.