The Golledge Brand - The Highest Level of Quality Assurance
Our philosophy is based upon quality and consistency of product and service.
We strive to achieve the highest level of quality in our components and our service. You can find more information here, including our ISO 9001:2015 certification,
or contact our team to find more information on how we can help you reduce your overall cost of acquisition.
Golledge is certified to BS EN ISO 9001:2015 by BSI Quality Assurance. BSI is one of the world's leading accreditation bodies. Every assessment since our original certification to BS EN ISO 9002:1994 in 1996 has shown a clean bill of health, with no non-conformances.
In addition to ISO 9001:2015 registration we also hold ISO 14001:2015 registration. Click here for more information on our environmental policy and to view our ISO 14001:2015 registration certificate.
Our philosophy is based around quality and consistency of product and service. We are dedicated to providing the highest quality of service in the industry. Our sustained growth and high level of customer loyalty is evidence of this commitment.
As a world-leading supplier Golledge are keenly aware of our responsibility to ensure our products are free from hazardous materials and substances of very high concern, and that all component materials are responsibly sourced from conflict-free regions.
Our declarations of regulation compliance can be accessed below and our team are always ready to advise on any queries you may have. Please contact email@example.com if you require further information or would like to know more.
The European Parliament has approved the Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS 2) Directive (2015/863/EU).
The directive states that the targeted materials shall no longer be contained in electronic products above certain limits unless there is an exemption provided in the rule.
RoHS 2 Declaration
Products meeting the stipulations of the directive are commonly referred to as "Pb-free", however as the directive includes other hazardous materials in addition to lead, it is possible for a device to be lead-free but still fail to be RoHS 2 compliant.
Component and Assembly Pb content shall be less than 0.1% by weight of the device (in accordance with IPC/EIA J-STD-006) and shall not be intentionally introduced.
Product pages on our website use the following icons to indicate the RoHS status of our products.
|Product is RoHS2 compliant|
|Product is 'lead-free' (<0.1% by weight)|
Our REACH declaration confirms our dedication to the REACH regulation directive and states that Golledge products do not contain any of the substances of very high concern (SVHC) above the regulatory threshold of 0.1% w/w. Our full candidate list of substances can be found at http://echa.europa.eu/candidate-list-table.
In uncertain times it is more important than ever to ensure we in the business community support human rights efforts throughout the world. That's why we review our Conflict Minerals declaration annually to ensure we will never fuel human rights abuses through the purchase of conflict minerals. Our conflict minerals declaration outlines the processes we undertake to ensure our products never knowingly contain conflict minerals.
Component counterfeiting is global problem that can lead in its worst case to failure in the field scenarios. We take every measure we can to make sure our customers are always protected by maintaining full tracability, ensuring robust supply procedures, strong official distributor relationships and strictly controlled supply processes. If you are in any doubt about the legitimacy of a Golledge product you have been supplied through a third-party please get in touch at firstname.lastname@example.org.
Golledge takes our responsibility to our environment seriously, and addition to our environmental policy we ensure that no persistent organic pollutants are used within our supply chain. For more information you can download our persistent organic pollutant (POP) declaration here.